The Data Acquisition Solution DAS1700 is a High-Speed Recorder that enables you to acquire multiple parameters: Voltage, Current (with shunt or Clamp), Temperature (thermocouples), measurements on sensors (e.g. 0-10V; 4-20 mA). You can set up your own channel configuration by choosing from the 4 input boards available: Universal Board, Universal High Voltage board, Strain Gauge board and Multiplexed boards. With suitable channel configuration you can record from 6 up to 72 channels and 16 logic inputs. Long term measurements with a sampling rate of 1 MSa/s (1 µs) are possible in taking full advantage of the 500 GB internal hard disk memory. With a special integrated function of Power Analysis you can record all your parameters on a Single-Phase and Three-Phase network (50 Hz, 400 Hz and 1 kHz). This Data Acquisition Solution can be remotely controlled by Ethernet or WiFi connection and the results can be analysed on license-free software developed by Sefram.

Common features:

• TFT panoramic LCD touch screen (15"6)
• 6 to 72 analogue channels
• Up to 6 measurement boards with extension
• 16 logic channels
• 128 Mword memory, with segments
• Internal hard disk : 500 GB
• Intuitive man-machine interface
• Power Analysis function (50 Hz, 400 Hz and 1 kHz)
• Interfaces : 4 x USB, Ethernet, VGA
• Various measurement functions
• Remote control
• Supplied with licence free Sefram Viewer software for data transfer and analysis
• Safety: 600V CAT III (depending on boards)
   
• 6 isolated input universal board:
• 6 isolated analogue channels
• 14-bit, 1 MSa/s, Bandwidth: 100 kHz
• DC, RMS AC+DC Voltage (+-500 V)
• Frequency, Thermocouples
   
• 6 isolated high voltage board:
• 6 isolated high voltage analogue channels
• 14-bit, 1 MSa/s, Bandwidth: 26 kHz
• DC, RMS AC+DC Voltage (+-1000 V)
• Frequency
   
• 6 isolated differential input board - Strain Gauge
• Measurement of strain gauge bridges (4 and 6 wires) and half-bridge
• Voltage up to 50V,Pt100, Pt1000, thermocouples
• 16-bit, 100 kSa/s, bandwidth 18 kHz
   
• 12 channels multiplexed board
• Voltage up to 50 V DC
• Pt100, Pt200, Pt500, Pt1000, thermocouples
• 16-bit, 5 kSa/s, bandwidth 1kHz
   
• Options


• CAN - LIN bus (2 CAN ports, 2 LIN input) - factory option
• IRIG board factory option
• WiFi interface
• Extension chassis for 3 additional measurement boards - factory option
• 2 TB memory extension
• GPS option - internal clock synchronization with an GPS time
• High impedance input option
• SENT option
• Without fan option - factory option